Blind Flange-manufacture,factory,supplier from China

PN10 refers to the pressure rating of the flange, which is 10 bar. DN400 refers to the nominal size of the pipe that the blind flange fits on, which is 400mm. A blind flange is a type of flange that is used to seal the end of a pipe or valve.

The flange blind plate plays the role of isolation and cutting off, and the role of the head and the tube cap is the same. Due to its good sealing performance, it is generally used as a reliable means of isolation for systems requiring complete isolation. A blind plate is a solid circle with a handle used in normally isolated systems. The figure 8 blind plate, shaped like figure 8, has a blind plate at one end and a throttling ring at the other end, but the diameter is the same as the pipe diameter of the pipeline, so it does not play a throttling role.

The PN10 DN300 Blind flange is a kind of flange that is used to shut off or seal the quit of a pipeline.

In industrial settings, blind flanges find extensive use in pipelines, pressure vessels, and plumbing systems. These flanges are an integral part of oil and gas refineries,chemical plants, and power generation facilities, as well as other industries such as water treatment and food processing. Their ability to seal off pipe ends prevents leaks, enhances safety, and ensures the efficient functioning of the overall system.Adhering to the Russian standard, PN16DN300 blind flanges follow specific dimensions and guidelines outlined by the national regulatory body.

A PN10 blind flange with DN600 size would typically have the following specifications:PN10 refers to the pressure rating of the flange, which in this case is 10 bar.DN600 refers to the nominal diameter of the flange, which is 600mm.Blind flange means that it is a solid disk that is used to block off a pipeline or to create a stoppage at the end of a pipeline.The flange would be made of a suitable material such as carbon steel or stainless steel, depending on the application and the fluid being transported.

A PN25 blind flange with DN600 size would have the following specifications:PN25 refers to the pressure rating of the flange, which in this case is 25 bar.DN600 refers to the nominal diameter of the flange, which is 600mm.Blind flange means that it is a solid disk that is used to block off a pipeline or to create a stoppage at the end of a pipeline.The flange would be made of a suitable material such as carbon steel or stainless steel, depending on the application and the fluid being transported.

The PN10 DN200 designation refers to the pressure rating (PN10) and the nominal diameter (DN200) of the blind flange. PN10 signifies the maximum pressure the flange can withstand, which, in this case, amounts to 10 bars or approximately 145 psi. This rating makes it suitable for a range of medium-pressure applications.

PN16 refers to the pressure rating of the flange, which is 16 bar. DN300 refers to the nominal diameter of the flange, which is 300 millimeters. Blind flanges are used to seal off the end of a piping system.

Our CompanyJin Runyuan flange of Shandong Machinery CO., LTD is located in the famous "township of the blacksmith"-Shandong Jinan chapter grave area set street agency headquarters, where convenient transportation beautiful environment. Company was founded in 2001, covers an area of 20000 square meters, is a professional manufacturer of forging flange company, main products: Japanese standard, American standard, German standard, the standard also can according to customers drawings or samples processing.

All in the two planes in the periphery of the use of bolt connection at the equal time closed connection parts, often regarded as "flange", such as the connection of air go with the flow pipe, this sort of elements can be known as "flange category parts".But this connection is entirely a segment of the equipment, such as the connection of the flange and the water pump, it is now now not correct to identify the water pump "flange parts".

All in the two planes in the periphery of the use of bolt connection at the equal time closed connection parts, oftentimes regarded as "flange", such as the connection of air waft pipe, this kind of elements can be regarded as "flange class parts".But this connection is totally a section of the equipment, such as the connection of the flange and the water pump, it is now now not right to identify the water pump "flange parts".

"flange class parts".But this connection is entirely a section of the equipment, such as the connection of the flange and the water pump, it is now now not correct to title the water pump "flange parts". Relatively small, such as valves, can be recognized as "flange parts". Flange connection is an essential connection mode in pipeline construction.

Our CompanyJin Runyuan flange of Shandong Machinery CO., LTD is located in the famous "township of the blacksmith"-Shandong Jinan chapter grave area set street agency headquarters, where convenient transportation beautiful environment. Company was founded in 2001, covers an area of 20000 square meters, is a professional manufacturer of forging flange company, main products: Japanese standard, American standard, German standard, the standard also can according to customers drawings or samples processing.

Our CompanyJin Runyuan flange of Shandong Machinery CO., LTD is located in the famous "township of the blacksmith"-Shandong Jinan chapter grave area set street agency headquarters, where convenient transportation beautiful environment. Company was founded in 2001, covers an area of 20000 square meters, is a professional manufacturer of forging flange company, main products: Japanese standard, American standard, German standard, the standard also can according to customers drawings or samples processing.

Our CompanyJin Runyuan Flange of Shandong Machinery Co., Ltd is located in the renowned "township of the blacksmith" in Shandong Jinan chapter grave area set street agency headquarters, offering a convenient transportation network and a beautiful environment. Our company was established in 2001 and occupies an area of 20,000 square meters. As a professional manufacturer of forging flanges, our main products include Japanese, American, and German standard flanges.

In addition to its robust design and high-pressure rating, the 10K 100A Sliding Flange offers easy installation and maintenance. The sliding band hole design allows for quick and hassle-free positioning, reducing installation time and effort.

Our CompanyThank you for the additional information about Jin Runyuan Flange of Shandong Machinery Co., Ltd. Here are some key points about the company:1. Location: The company is situated in Shandong Jinan chapter grave area, known as the "township of the blacksmith". This location offers convenient transportation and a beautiful environment.2. Establishment: Jin Runyuan Flange was founded in 2001 and occupies an area of 20,000 square meters.3.

Our CompanyJin Runyuan Flange, located in the renowned "township of the blacksmith" in Shandong Jinan Chapter Grave Area, boasts a convenient transportation system and a beautiful environment. As a professional manufacturer of forging flanges, the company was established in 2001 and occupies an area of 20,000 square meters. The main product range includes flanges of Japanese, American, and German standards. Additionally, they are capable of processing flanges based on customer drawings or samples.

A PN20 DN200 Galvanized Yellow Flange is a kind of flange that is covered with an anti-corrosive and anti-rust layer that offers it a yellowish appearance.

When it comes to industrial piping systems, flanges play a crucial role in ensuring the secure and leakproof connection of various components. A flat flange is one such type that is widely used in a range of applicationsOur CompanyJin Runyuan flange of Shandong Machinery CO., LTD is located in the famous "township of the blacksmith"-Shandong Jinan chapter grave area set street agency headquarters, where convenient transportation beautiful environment.

An American Standard Flange, additionally regarded as ANSI Flange, is a kind of flange that conforms to requirements set with the aid of the American National Standards Institute (ANSI). These flanges are usually used in piping and plumbing structures for connections between pipes or valves. They come in a range of sizes, stress ratings, and going through types.

Galvanizing involves the application of a protective layer of zinc to the steel body of the flange, enhancing its resistance to corrosion and rust. As a result, the galvanized flat flange can withstand harsh environmental conditions, making it suitable for both indoor and outdoor installations.

Our CompanyJin Runyuan flange of Shandong Machinery CO., LTD is located in the famous "township of the blacksmith"-Shandong Jinan chapter grave area set street agency headquarters, where convenient transportation beautiful environment. Company was founded in 2001, covers an area of 20000 square meters, is a professional manufacturer of forging flange company, main products: Japanese standard, American standard, German standard, the standard also can according to customers drawings or samples processing.

Our CompanyJin Runyuan flange of Shandong Machinery CO., LTD is located in the famous "township of the blacksmith"-Shandong Jinan chapter grave area set street agency headquarters, where convenient transportation beautiful environment. Company was founded in 2001, covers an area of 20000 square meters, is a professional manufacturer of forging flange company, main products: Japanese standard, American standard, German standard, the standard also can according to customers drawings or samples processing.