Blind Plate With Waterline-manufacture,factory,supplier from China

The flange blind plate plays the role of isolation and cutting off, and the role of the head and the tube cap is the same. Due to its good sealing performance, it is generally used as a reliable means of isolation for systems requiring complete isolation. A blind plate is a solid circle with a handle used in normally isolated systems. The figure 8 blind plate, shaped like figure 8, has a blind plate at one end and a throttling ring at the other end, but the diameter is the same as the pipe diameter of the pipeline, so it does not play a throttling role.

When it comes to installation, flat plate flange offers ease and convenience. Its flat design allows for straightforward alignment and bolting, simplifying the assembly process.

All in the two planes in the periphery of the use of bolt connection at the equal time closed connection parts, often regarded as "flange", such as the connection of air go with the flow pipe, this sort of elements can be known as "flange category parts".But this connection is entirely a segment of the equipment, such as the connection of the flange and the water pump, it is now now not correct to identify the water pump "flange parts".

PN10 refers to the pressure rating of the flange, which is 10 bar. DN400 refers to the nominal size of the pipe that the blind flange fits on, which is 400mm. A blind flange is a type of flange that is used to seal the end of a pipe or valve.

PN10 DN200 Flat Plate Flange refers to a type of flange that has a flat surface and is designed to connect pipes with a diameter of 200 mm in a PN10 (pressure rating of 10 bar) piping system. This type of flange is commonly used in water supply, chemical, and industrial applications. It is often made of stainless steel or carbon steel and can come in various shapes, including round, square, and rectangular.

A PN10 blind flange with DN600 size would typically have the following specifications:PN10 refers to the pressure rating of the flange, which in this case is 10 bar.DN600 refers to the nominal diameter of the flange, which is 600mm.Blind flange means that it is a solid disk that is used to block off a pipeline or to create a stoppage at the end of a pipeline.The flange would be made of a suitable material such as carbon steel or stainless steel, depending on the application and the fluid being transported.

A PN25 blind flange with DN600 size would have the following specifications:PN25 refers to the pressure rating of the flange, which in this case is 25 bar.DN600 refers to the nominal diameter of the flange, which is 600mm.Blind flange means that it is a solid disk that is used to block off a pipeline or to create a stoppage at the end of a pipeline.The flange would be made of a suitable material such as carbon steel or stainless steel, depending on the application and the fluid being transported.

The PN10 DN300 Blind flange is a kind of flange that is used to shut off or seal the quit of a pipeline.

In industrial settings, blind flanges find extensive use in pipelines, pressure vessels, and plumbing systems. These flanges are an integral part of oil and gas refineries,chemical plants, and power generation facilities, as well as other industries such as water treatment and food processing. Their ability to seal off pipe ends prevents leaks, enhances safety, and ensures the efficient functioning of the overall system.Adhering to the Russian standard, PN16DN300 blind flanges follow specific dimensions and guidelines outlined by the national regulatory body.

Another advantage of Russian Standard Flange is its compatibility with a range of piping materials. Carbon steel flanges can be used with various pipe materials, including carbon steel, stainless steel, and even non-metallic pipes, making them highly versatile.

The PN10 DN200 designation refers to the pressure rating (PN10) and the nominal diameter (DN200) of the blind flange. PN10 signifies the maximum pressure the flange can withstand, which, in this case, amounts to 10 bars or approximately 145 psi. This rating makes it suitable for a range of medium-pressure applications.

PN16 refers to the pressure rating of the flange, which is 16 bar. DN300 refers to the nominal diameter of the flange, which is 300 millimeters. Blind flanges are used to seal off the end of a piping system.

A 10K 20A black coated board can have several advantages and functions depending on its specific application.

All in the two planes in the periphery of the use of bolt connection at the equal time closed connection parts, often regarded as "flange", such as the connection of air go with the flow pipe, this sort of elements can be known as "flange category parts".But this connection is entirely a segment of the equipment, such as the connection of the flange and the water pump, it is now now not correct to identify the water pump "flange parts".

A flat flange is a crucial component in various industrial applications, facilitating the connection between pipes, valves, and other equipment. Among the wide array of flat flanges available in the market, the PN25 DN600 flat plate flange stands out as a high-quality option.

Our CompanyJin Runyuan flange of Shandong Machinery CO., LTD is located in the famous "township of the blacksmith"-Shandong Jinan chapter grave area set street agency headquarters, where convenient transportation beautiful environment. Company was founded in 2001, covers an area of 20000 square meters, is a professional manufacturer of forging flange company, main products: Japanese standard, American standard, German standard, the standard also can according to customers drawings or samples processing.

All in the two planes in the periphery of the use of bolt connection at the equal time closed connection parts, oftentimes regarded as "flange", such as the connection of air waft pipe, this kind of elements can be regarded as "flange class parts".But this connection is totally a section of the equipment, such as the connection of the flange and the water pump, it is now now not right to identify the water pump "flange parts".

PN10 DN50 flat flange is a flange used in piping systems.  PN10 refers to the pressure rating of the flange, which means that it can withstand a maximum pressure of 10 bar or 145 psi.  DN50 indicates the nominal diameter or size of the pipe that the flange will use, which is 50mm.  A in place.

"flange class parts".But this connection is entirely a section of the equipment, such as the connection of the flange and the water pump, it is now now not correct to title the water pump "flange parts". Relatively small, such as valves, can be recognized as "flange parts". Flange connection is an essential connection mode in pipeline construction.

Another noteworthy characteristic of JPI7S-15-99 Class 150 flanges is their compatibility with different types of gaskets and seals. These flanges can be easily paired with various sealing materials such as graphite, PTFE, or spiral wound gaskets, allowing for flexibility and adaptability to different operating conditions. The proper selection of gaskets ensures a leak-free connection and prolongs the lifespan of the flanges.Furthermore, JPI7S-15-99 Class 150 flanges are designed to facilitate easy installation and maintenance.

Our CompanyJin Runyuan flange of Shandong Machinery CO., LTD is located in the famous "township of the blacksmith"-Shandong Jinan chapter grave area set street agency headquarters, where convenient transportation beautiful environment. Company was founded in 2001, covers an area of 20000 square meters, is a professional manufacturer of forging flange company, main products: Japanese standard, American standard, German standard, the standard also can according to customers drawings or samples processing.

Our CompanyJin Runyuan flange of Shandong Machinery CO., LTD is located in the famous "township of the blacksmith"-Shandong Jinan chapter grave area set street agency headquarters, where convenient transportation beautiful environment. Company was founded in 2001, covers an area of 20000 square meters, is a professional manufacturer of forging flange company, main products: Japanese standard, American standard, German standard, the standard also can according to customers drawings or samples processing.

Our CompanyJin Runyuan Flange of Shandong Machinery Co., Ltd is located in the renowned "township of the blacksmith" in Shandong Jinan chapter grave area set street agency headquarters, offering a convenient transportation network and a beautiful environment. Our company was established in 2001 and occupies an area of 20,000 square meters. As a professional manufacturer of forging flanges, our main products include Japanese, American, and German standard flanges.

A PN20 DN200 Galvanized Yellow Flange is a kind of flange that is covered with an anti-corrosive and anti-rust layer that offers it a yellowish appearance.