PN10 DN200 Blind Flange-manufacture,factory,supplier from China

The PN10 DN200 designation refers to the pressure rating (PN10) and the nominal diameter (DN200) of the blind flange. PN10 signifies the maximum pressure the flange can withstand, which, in this case, amounts to 10 bars or approximately 145 psi. This rating makes it suitable for a range of medium-pressure applications.

PN10 refers to the pressure rating of the flange, which is 10 bar. DN400 refers to the nominal size of the pipe that the blind flange fits on, which is 400mm. A blind flange is a type of flange that is used to seal the end of a pipe or valve.

The flat design of the PN10 DN200 Flat Flangeensures a tight seal between two connected components. This flange type is commonly used in applications that require easy alignment and assembly, providing a seamless connection without any protruding parts.

The PN10 DN300 Blind flange is a kind of flange that is used to shut off or seal the quit of a pipeline.

A PN10 blind flange with DN600 size would typically have the following specifications:PN10 refers to the pressure rating of the flange, which in this case is 10 bar.DN600 refers to the nominal diameter of the flange, which is 600mm.Blind flange means that it is a solid disk that is used to block off a pipeline or to create a stoppage at the end of a pipeline.The flange would be made of a suitable material such as carbon steel or stainless steel, depending on the application and the fluid being transported.

A PN20 DN200 Galvanized Yellow Flange is a kind of flange that is covered with an anti-corrosive and anti-rust layer that offers it a yellowish appearance.

PN16 refers to the pressure rating of the flange, which is 16 bars. DN200 refers to the diameter of the pipe the flange is designed to fit, which is 200mm.

The flange blind plate plays the role of isolation and cutting off, and the role of the head and the tube cap is the same. Due to its good sealing performance, it is generally used as a reliable means of isolation for systems requiring complete isolation. A blind plate is a solid circle with a handle used in normally isolated systems. The figure 8 blind plate, shaped like figure 8, has a blind plate at one end and a throttling ring at the other end, but the diameter is the same as the pipe diameter of the pipeline, so it does not play a throttling role.

PN10 DN200 Flat Plate Flange refers to a type of flange that has a flat surface and is designed to connect pipes with a diameter of 200 mm in a PN10 (pressure rating of 10 bar) piping system. This type of flange is commonly used in water supply, chemical, and industrial applications. It is often made of stainless steel or carbon steel and can come in various shapes, including round, square, and rectangular.

The PN16 DN200 flat flange offers a versatile solution for various applications, including oil and gas, petrochemical, water treatment, and HVAC systems. Its reliable performance and adherence to the Russian standard make it an ideal choice for industries seeking a robust and compliant flange option.When selecting a PN16 DN200 flat flange, it is essential to consider factors such as the operating conditions, media type, and compatibility with other system components.

Our CompanyJin Runyuan Flange of Shandong Machinery CO., LTD is a professional manufacturer of forging flanges. Established in 2001, the company is located in the renowned "township of the blacksmith" in the Shandong Jinan chapter grave area set street agency headquarters. The location offers convenient transportation and a beautiful environment.Covering an area of 20,000 square meters, the company has amassed fixed assets worth 40 million and has an annual output of 40 million tons of flanges.

In industrial settings, blind flanges find extensive use in pipelines, pressure vessels, and plumbing systems. These flanges are an integral part of oil and gas refineries,chemical plants, and power generation facilities, as well as other industries such as water treatment and food processing. Their ability to seal off pipe ends prevents leaks, enhances safety, and ensures the efficient functioning of the overall system.Adhering to the Russian standard, PN16DN300 blind flanges follow specific dimensions and guidelines outlined by the national regulatory body.

The production engineering process of a PN40 DN200 butt welding flange typically involves the following steps:Raw material selection: The flange is usually made of high-quality materials such as carbon steel, stainless steel, or alloy steel. The selected material should have high tensile strength, corrosion resistance, and heat resistance properties.Cutting: The raw material is cut into the required shape and size using a cutting machine.Heating: The flange is heated to a specific temperature using a furnace or a heating machine.

Our CompanyJin Runyuan flange of Shandong Machinery CO., LTD is located in the famous "township of the blacksmith"-Shandong Jinan chapter grave area set street agency headquarters, where convenient transportation beautiful environment. Company was founded in 2001, covers an area of 20000 square meters, is a professional manufacturer of forging flange company, main products: Japanese standard, American standard, German standard, the standard also can according to customers drawings or samples processing.

A PN25 blind flange with DN600 size would have the following specifications:PN25 refers to the pressure rating of the flange, which in this case is 25 bar.DN600 refers to the nominal diameter of the flange, which is 600mm.Blind flange means that it is a solid disk that is used to block off a pipeline or to create a stoppage at the end of a pipeline.The flange would be made of a suitable material such as carbon steel or stainless steel, depending on the application and the fluid being transported.

Our CompanyJin Runyuan Flange of Shandong Machinery Co., Ltd. is a professional manufacturer of forging flanges. The company is located in the renowned "township of the blacksmith" in Shandong Jinan Chapter Grave Area Set Street Agency Headquarters, offering convenient transportation and a beautiful environment. Established in 2001, the company covers an area of 20,000 square meters. Their main products include flanges of Japanese standard, American standard, and German standard. They can also customize products according to customer drawings or samples.

All in the two planes in the periphery of the use of bolt connection at the equal time closed connection parts, often regarded as "flange", such as the connection of air go with the flow pipe, this sort of elements can be known as "flange category parts".But this connection is entirely a segment of the equipment, such as the connection of the flange and the water pump, it is now now not correct to identify the water pump "flange parts".

PN16 refers to the pressure rating of the flange, which is 16 bar. DN300 refers to the nominal diameter of the flange, which is 300 millimeters. Blind flanges are used to seal off the end of a piping system.

Our CompanyJin Runyuan flange of Shandong Machinery CO., LTD is located in the famous "township of the blacksmith"-Shandong Jinan chapter grave area set street agency headquarters, where convenient transportation beautiful environment. Company was founded in 2001, covers an area of 20000 square meters, is a professional manufacturer of forging flange company, main products: Japanese standard, American standard, German standard, the standard also can according to customers drawings or samples processing.

PN10 refers to the pressure rating of the flange, which means it can withstand up to 10 bar of pressure. DN1400 refers to the size of the flange, which has a nominal diameter of 1400 mm (or approximately 55 inches).

Our CompanyJin Runyuan flange of Shandong Machinery CO., LTD is located in the famous "township of the blacksmith"-Shandong Jinan chapter grave area set street agency headquarters, where convenient transportation beautiful environment. Company was founded in 2001, covers an area of 20000 square meters, is a professional manufacturer of forging flange company, main products: Japanese standard, American standard, German standard, the standard also can according to customers drawings or samples processing.

PN10 refers to the pressure rating of the flange, which is 10 bars. DN50 refers to the nominal diameter of the flange, which is 50 millimeters.

PN10 refers to the pressure rating for the flange, which is 10 bar (145 psi). DN80 refers to the nominal diameter of the pipe that the flange is designed to connect to, which is 80 mm (approximately 3 inches).

PN10 DN250 Russian Standard Flange refers to a particular type of flange that is commonly used in Russia for pipelines. The term PN10 stands for "Pressure Nominal 10," which refers to the maximum allowable pressure that the flange can handle. In this case, PN10 indicates that the flange can handle a maximum pressure of 10 bar or 145 psi.The DN250 refers to the nominal diameter of the flange, which is 250 millimeters or approximately 10 inches in diameter.