PN10 DN500 Blind Flanges-manufacture,factory,supplier from China

PN10 refers to the pressure rating of the flange, which is 10 bar. DN400 refers to the nominal size of the pipe that the blind flange fits on, which is 400mm. A blind flange is a type of flange that is used to seal the end of a pipe or valve.

Our CompanyJin Runyuan flange of Shandong Machinery CO., LTD is located in the famous "township of the blacksmith"-Shandong Jinan chapter grave area set street agency headquarters, where convenient transportation beautiful environment. Company was founded in 2001, covers an area of 20000 square meters, is a professional manufacturer of forging flange company, main products: Japanese standard, American standard, German standard, the standard also can according to customers drawings or samples processing.

The PN10 DN300 Blind flange is a kind of flange that is used to shut off or seal the quit of a pipeline.

All in the two planes in the periphery of the use of bolt connection at the equal time closed connection parts, often regarded as "flange", such as the connection of air go with the flow pipe, this sort of elements can be known as "flange category parts".But this connection is entirely a segment of the equipment, such as the connection of the flange and the water pump, it is now now not correct to identify the water pump "flange parts".

The flange blind plate plays the role of isolation and cutting off, and the role of the head and the tube cap is the same. Due to its good sealing performance, it is generally used as a reliable means of isolation for systems requiring complete isolation. A blind plate is a solid circle with a handle used in normally isolated systems. The figure 8 blind plate, shaped like figure 8, has a blind plate at one end and a throttling ring at the other end, but the diameter is the same as the pipe diameter of the pipeline, so it does not play a throttling role.

Our CompanyJin Runyuan Flange of Shandong Machinery CO., LTD is a professional manufacturer of forging flanges. The company was founded in 2001 and is located in the Shandong Jinan chapter grave area of China.The company covers an area of 20,000 square meters and has existing fixed assets worth 40 million. They have a strong technical force and professional experience, supported by advanced forging machinery processing, assembly, inspection, and packaging production lines.

The PN10 DN200 designation refers to the pressure rating (PN10) and the nominal diameter (DN200) of the blind flange. PN10 signifies the maximum pressure the flange can withstand, which, in this case, amounts to 10 bars or approximately 145 psi. This rating makes it suitable for a range of medium-pressure applications.

A PN10 blind flange with DN600 size would typically have the following specifications:PN10 refers to the pressure rating of the flange, which in this case is 10 bar.DN600 refers to the nominal diameter of the flange, which is 600mm.Blind flange means that it is a solid disk that is used to block off a pipeline or to create a stoppage at the end of a pipeline.The flange would be made of a suitable material such as carbon steel or stainless steel, depending on the application and the fluid being transported.

Our CompanyJin Runyuan flange of Shandong Machinery CO., LTD is located in the famous "township of the blacksmith"-Shandong Jinan chapter grave area set street agency headquarters, where convenient transportation beautiful environment. Company was founded in 2001, covers an area of 20000 square meters, is a professional manufacturer of forging flange company, main products: Japanese standard, American standard, German standard, the standard also can according to customers drawings or samples processing.

In industrial settings, blind flanges find extensive use in pipelines, pressure vessels, and plumbing systems. These flanges are an integral part of oil and gas refineries,chemical plants, and power generation facilities, as well as other industries such as water treatment and food processing. Their ability to seal off pipe ends prevents leaks, enhances safety, and ensures the efficient functioning of the overall system.Adhering to the Russian standard, PN16DN300 blind flanges follow specific dimensions and guidelines outlined by the national regulatory body.

PN16 refers to the pressure rating of the flange, which is 16 bar. DN300 refers to the nominal diameter of the flange, which is 300 millimeters. Blind flanges are used to seal off the end of a piping system.

PN10 DN250 WeldNeck Flanges have several advantages and characteristics.Pressure Rating:Advantages of PN10 DN250 WeldNeck Flanges:High Pressure Resistance: PN10 rating implies that these flanges can withstand a maximum operating pressure of 10 bar, making them suitable for high-pressure applications.Increased Safety: WeldNeck flanges have a long tapered hub that provides excellent reinforcement and reduces the risk of leakage or failure under high-pressure conditions.Improved Fluid Flow: The smooth transition from the flange to the pipe reduces turbulence and pressure drop, ensuring efficient

A PN25 blind flange with DN600 size would have the following specifications:PN25 refers to the pressure rating of the flange, which in this case is 25 bar.DN600 refers to the nominal diameter of the flange, which is 600mm.Blind flange means that it is a solid disk that is used to block off a pipeline or to create a stoppage at the end of a pipeline.The flange would be made of a suitable material such as carbon steel or stainless steel, depending on the application and the fluid being transported.

The GOST 12820-80 standard is a set of technical requirements and specifications established by the Russian standardization authority. This standard ensures the compatibility of flanges produced by different manufacturers, allowing for interchangeability and easy installation. GOST 12820-80 flanges are manufactured with precise dimensions and tolerances, ensuring a perfect fit and eliminating the risk of leaks or failures.One of the key advantages of PN10 flanges, in accordance with the GOST 12820-80 standard, is their versatility.

Our CompanyJin Runyuan flange of Shandong Machinery CO., LTD is located in the famous "township of the blacksmith"-Shandong Jinan chapter grave area set street agency headquarters, where convenient transportation beautiful environment. Company was founded in 2001, covers an area of 20000 square meters, is a professional manufacturer of forging flange company, main products: Japanese standard, American standard, German standard, the standard also can according to customers drawings or samples processing.

PN10 DN600 WeldNeck Flanges have several advantages and characteristics.Pressure Rating:Advantages of PN10 DN600 WeldNeck Flanges:High Pressure Resistance: PN10 rating implies that these flanges can withstand a maximum operating pressure of 10 bar, making them suitable for high-pressure applications.Increased Safety: WeldNeck flanges have a long tapered hub that provides excellent reinforcement and reduces the risk of leakage or failure under high-pressure conditions.Improved Fluid Flow: The smooth transition from the flange to the pipe reduces turbulence and pressure drop, ensuring efficient

Our CompanyJin Runyuan flange of Shandong Machinery CO., LTD is located in the famous "township of the blacksmith"-Shandong Jinan chapter grave area set street agency headquarters, where convenient transportation beautiful environment. Company was founded in 2001, covers an area of 20000 square meters, is a professional manufacturer of forging flange company, main products: Japanese standard, American standard, German standard, the standard also can according to customers drawings or samples processing.

Our CompanyJin Runyuan Flange of Shandong Machinery Co., Ltd is located in the renowned "township of the blacksmith" in Shandong Jinan chapter grave area set street agency headquarters, offering a convenient transportation network and a beautiful environment. Our company was established in 2001 and occupies an area of 20,000 square meters. As a professional manufacturer of forging flanges, our main products include Japanese, American, and German standard flanges.

PN10 refers to the pressure rating of a pipe or fitting, indicating that it can withstand a maximum pressure of 10 bar. DN300 refers to the nominal diameter of the pipe or fitting, which is 300 millimeters.

PN10 refers to the pressure rating of the flange, which is 10 bars. DN50 refers to the nominal diameter of the flange, which is 50 millimeters.

PN10 DN250 Russian Standard Flange refers to a particular type of flange that is commonly used in Russia for pipelines. The term PN10 stands for "Pressure Nominal 10," which refers to the maximum allowable pressure that the flange can handle. In this case, PN10 indicates that the flange can handle a maximum pressure of 10 bar or 145 psi.The DN250 refers to the nominal diameter of the flange, which is 250 millimeters or approximately 10 inches in diameter.

"flange class parts".But this connection is entirely a section of the equipment, such as the connection of the flange and the water pump, it is now now not correct to title the water pump "flange parts". Relatively small, such as valves, can be recognized as "flange parts". Flange connection is an essential connection mode in pipeline construction.

PN10 refers to the pressure rating for the flange, which is 10 bar (145 psi). DN80 refers to the nominal diameter of the pipe that the flange is designed to connect to, which is 80 mm (approximately 3 inches).

PN10 refers to the pressure rating of the flange, which means it can withstand up to 10 bar of pressure. DN1400 refers to the size of the flange, which has a nominal diameter of 1400 mm (or approximately 55 inches).