< >

PN10 DN50 Slotted flange

Flange is a part connecting pipes to each other, generally used for connecting pipe ends. Flange is mainly used in industry and plays an important role in industrial manufacturing. Therefore, the market demand for flange is relatively large. As an industrial part, flange plays an irreplaceable role. So, how does it work? What are the advantages of flanges? Next, Xiaobian will introduce the function of the flange for you, so that you can understand the flange more, more familiar with the flange, so as to provide help for your production activities.

Flange, also called flange or flange. It is the part that connects pipes to pipes. Connected to tube end. There are holes on the flange, and bolts can be worn to make the two flanges tightly connected. The flanges are gasketed. Flanged pipe fittings are pipe fittings with flanges (flanges or joints). It can be cast, threaded or welded. flange joints (flange, joint) are formed of a pair of flanges, a gasket, and several bolts and nuts. The gasket is placed between the sealing surface of the two flanges. After tightening the nut, the specific pressure on the surface of the gasket will be deformed after reaching a certain value, and the uneven part of the sealing surface will be filled, so that the connection is tight and not leaking. Some pipe fittings and equipment have their own flange, also belong to the flange connection. Flange connection is an important connection mode in pipeline construction.

Flange connection is easy to use and can withstand greater pressure. Flange connection is widely used in industrial pipeline. In the home, the pipe diameter is small, and is low pressure, not visible flange connection. If you're in a boiler room or a production site, there are flanged pipes and equipment everywhere.

The purpose of the flange is to secure and seal the joint of the pipe fitting. Flange is mainly used to connect tight pipes, pipe fittings, etc., and maintain the sealing performance of pipe fittings; Flange detachable, easy to disassemble check pipe condition. Reducing flange corrosion resistance, acid and alkali resistance, can be used in water conservancy, electric power, power station, pipeline fittings, industry, pressure vessels and other aspects.

Stainless steel flange can be used for boiler pressure vessels, petroleum, chemical, shipbuilding, pharmaceutical, metallurgy, machinery, food and other industries, it is easy to replace a section of pipeline.

Contact Now E-Mail Telephone

Product Details

The manufacturing procedure of a PN6 DN50 sliding flange commonly includes the following steps:

Material selection: The flange is generally made from extraordinary substances such as stainless steel, carbon steel, or alloy metal that have excessive tensile electricity and resistance to corrosion.

Cutting the material: The chosen fabric is reduce to the required dimension and structure the use of a reducing machine.

Forming the flange: The reduce fabric is pressed into the form of a flange the use of a warm forging process. This technique entails heating the cloth to a excessive temperature and then urgent it into the favored structure the use of a high-pressure hydraulic press.

Machining the flange: The fashioned flange isThe manufacturing manner of a PN6 DN50 sliding flange consists of the following steps:

Raw cloth selection: The flange is commonly made of carbon steel, stainless steel, or alloy steel. The chosen cloth have to be of excessive exceptional to make sure the sturdiness and energy of the flange.

Cutting: The uncooked fabric is reduce into the required structure and measurement the use of a reducing machine.

Heating: The flange is heated to a unique temperature the use of a furnace or a heating machine. This makes it less complicated to structure the flange.

Shaping: The heated flange is fashioned into the required form the use of a hydraulic press or a hammer.

Machining: The formed flange is then machined to eliminate any hard edges or surfaces. This ensures a easy floor and improves the in shape of the flange.

Drilling: Holes are drilled into the flange for attachment to different components.

Surface treatment: The flange is then handled with floor coating such as galvanizing or painting. This protects the flange from corrosion and improves its appearance.

Quality control: The completed flange is inspected and examined to make certain that it meets the required specs and standards.

Packaging and shipping: The flange is packed in accordance to the customer’s necessities and shipped to the preferred location.Our Company

Jin Runyuan flange of Shandong Machinery CO., LTD is located in the famous "township of the blacksmith"-Shandong Jinan chapter grave area set street agency headquarters, where convenient transportation beautiful environment. Company was founded in 2001, covers an area of 20000 square meters, is a professional manufacturer of forging flange company, main products: Japanese standard, American standard, German standard, the standard also can according to customers drawings or samples processing. Existing fixed assets of 40 million,the annual output 40 million tons.Products are exported to Japan, the United States, Germany, South Korea, Russia, Brazil, South Africa, more than 20 countries and regions, such as product quality deeply the general customers the high praise and trust.

Company strong technical force, professional experience, equiptment, professional production and technical personnel 10 people, the production of 120 front-line workers, management personnel E people, packing, inspection personnel more than 20 people. High quality international most advanced forging machinery processing, assembly, inspection, packaging production lines, product quality meet the national and international standards, and has obtained ISSO9001-2000 quality management system certification, the French classification society certification, China special equipment manufacturing license, pressure vessel manufacturing license.

Our Factory

Raw Material Blanking

Welding Ends For Welding Neck Flanges